🌊 ClearWave

Eject Water from Samsung Galaxy S23

Use a 170 Hz cleaning tone that may help move surface moisture from your Samsung Galaxy S23's speaker opening. Results can vary by device and moisture level.

Optimized for Samsung Galaxy S23

⚠️ Turn physical phone volume to 100% for maximum kinetic push.

Target Frequency (Water Expulsion) 170 Hz
130 Hz (Deep Bass) 165 Hz (Optimal Eject) 220 Hz (High Ingress)
Acoustic Output Spectrum 170 Hz

🛠️ Samsung Galaxy S23 Acoustic & Ingress Profile

Water Resistance Rating IP68
Acoustic Architecture Dual stereo speakers with Dolby Atmos tuning
Hydrophobic Enclosure Limits

Rated IP68 freshwater resistance. Chlorine and salt water cause accelerated seal corrosion.

Known Symptoms
  • Water droplet lock in narrow bottom speaker slit
  • Distorted top earpiece output during phone calls

How to Eject Water Effectively

Follow these physical guidelines alongside acoustic resonance for best results.

🔊 STEP 01

Maximize Device Volume

Turn your system volume all the way up to 100%. The sound waves require maximum speaker diaphragm excursion to push out moisture.

📱 STEP 02

Orient Speaker Facing Down

Position your Samsung Galaxy S23 with the speaker ports tilted downward toward a clean cloth so gravity assists the water expulsion.

⏱️ STEP 03

Run 2–3 Full Cycles

Keep the tone running for 60 to 90 seconds. You will notice small moisture droplets or dust being dislodged from the grill.

✨ STEP 04

Absorb & Dry

Gently dab the dislodged droplets with an absorbent microfiber cloth. Never insert toothpicks, cotton swabs, or pins into the speaker mesh.

Model Specific Maintenance Notes

The Samsung Galaxy S23 features an ingress rating of IP68. If the speaker sounds muffled after water exposure, surface moisture may affect audio clarity. Keep the device in a dry, well-ventilated area and use the cleaning tone cautiously. If audio remains abnormal or the device shows other problems, stop using it and seek professional repair.