Why is 165 Hz recommended for iPhone 15 Pro Max?

ClearWave uses 165 Hz as a cleaning tone for this device profile. The tone is intended to produce audible speaker movement that may help move surface moisture from the speaker opening. Results can vary by device and the amount of moisture present.

Does running this void my Apple warranty?

ClearWave is an independent browser-based utility and does not determine or guarantee a manufacturer's warranty terms. Warranty coverage depends on the device manufacturer and the specific circumstances of any damage.

What if water remains in my iPhone 15 Pro Max after 3 cycles?

If sound stays muffled, keep the phone tilted downward in a warm, dry spot with airflow for 2–3 hours. Never apply external heat guns or hair dryers.

Eject Water from iPhone 15 Pro Max

Use a 165 Hz cleaning tone that may help move surface moisture from your iPhone 15 Pro Max's speaker opening. Results can vary by device and moisture level.

Optimized for iPhone 15 Pro Max

⚠️ Turn physical phone volume to 100% for maximum kinetic push.

Target Frequency (Water Expulsion) 165 Hz

130 Hz (Deep Bass) 165 Hz (Optimal Eject) 220 Hz (High Ingress)

Acoustic Output Spectrum 165 Hz

🛠️ iPhone 15 Pro Max Acoustic & Ingress Profile

Water Resistance Rating IP68 (6 meters up to 30 mins)

Acoustic Architecture Stereo (bottom-firing ported speaker + top earpiece chamber)

Hydrophobic Enclosure Limits

Resistant to everyday splashes, fresh water submersion up to 6 meters. Salt water corrodes mesh adhesives quickly.

Known Symptoms

Muffled top earpiece sound after rain exposure
Distorted bass response from wet bottom mesh
False liquid detected warning inside USB-C socket

How to Eject Water Effectively

Follow these physical guidelines alongside acoustic resonance for best results.

🔊 STEP 01

Maximize Device Volume

Turn your system volume all the way up to 100%. The sound waves require maximum speaker diaphragm excursion to push out moisture.

📱 STEP 02

Orient Speaker Facing Down

Position your iPhone 15 Pro Max with the speaker ports tilted downward toward a clean cloth so gravity assists the water expulsion.

⏱️ STEP 03

Run 2–3 Full Cycles

Keep the tone running for 60 to 90 seconds. You will notice small moisture droplets or dust being dislodged from the grill.

✨ STEP 04

Absorb & Dry

Gently dab the dislodged droplets with an absorbent microfiber cloth. Never insert toothpicks, cotton swabs, or pins into the speaker mesh.

Model Specific Maintenance Notes

The iPhone 15 Pro Max features an ingress rating of IP68 (6 meters up to 30 mins). If the speaker sounds muffled after water exposure, surface moisture may affect audio clarity. Keep the device in a dry, well-ventilated area and use the cleaning tone cautiously. If audio remains abnormal or the device shows other problems, stop using it and seek professional repair.